Operating Handle/Steering Wheel Inspection
Angle Sensors
SAHC series sensors are one-piece linear contact angle position sensors. The sensors use Hall effect technology, which utilizes a magnetic field generated by permanent magnets for operation. They provide a linear change in output voltage (proportional to the input voltage) corresponding to the angle of rotation of the input shaft.
Sensor with linear output from 0° to 360°, no compensation required
-
Applications
-
Basic Parameters
-
Dimensions
-
Model
-
Request a Quote
-
Related Products
APPLICATIONS
-
-
Shift Position Detection -
Vehicle Height Detection -
Gas Pedal Position Detection
BASIC PARAMETERS
| Model | SAHC01-120 Series |
| Input Voltage | 5.0 VDC ± 10% |
| Measurement Angle | 0~120° |
| Output Signal | 0.5~4.5V Analog, PWM, or SENT output options available. Measurement range: 5° to 85°. The output is linear from 10% to 90% of the input voltage |
| Output Clamping Function | 0° to 5°: 10% of the input voltage 85° to 120°: 90% of the input voltage |
| Output Linearity | ±3%F.S |
| Housing Material | Fiberglass Reinforced Plastic |
| Service Life | Over 10 million full cycles |
| Protection Rating | IP67 |
| Vibration Resistance | 1g RMS axial, 5g RMS horizontal, 8g RMS vertical; 20 Hz to 2 kHz |
| Operating Temperature | -40 ℃~+135 ℃ |
| Storage Temperature | -40 ℃~+150 ℃ |
| Wiring Method | End Exit Wiring |
BASIC PARAMETERS
DIMENSIONS
REQUEST A QUOTE
