RF Admittance Level Sensor: Safety and Operational Guidelines
The RF Admittance Level Sensor from Shenzhen Soway Tech Limited is a high-precision device designed for reliable level measurement in various industrial applications. This sensor uses advanced RF admittance technology to provide accurate readings, even in challenging environments. The SFC5 Series RF Admittance Level Sensors are specifically engineered to eliminate measurement errors caused by electrode material buildup, ensuring consistent performance and minimal maintenance.
Safety and Operational Guidelines
Safety Precautions
Electrical Safety:
Ensure that the power supply voltage is within the specified range of 9–36V DC to avoid damaging the sensor.
Disconnect the power supply before performing any maintenance or calibration to prevent electrical shock.
Environmental Conditions:
The sensor is designed to operate within specific temperature ranges: -40℃ to 85℃ for integrated probes and -55℃ to 200℃ for split probes.
Avoid exposing the sensor to corrosive substances or environments that could damage the probe or housing.
Mechanical Safety:
The sensor contains no movable or elastic components, but care should be taken to avoid physical damage during installation and operation.
Ensure that the sensor is securely mounted to prevent movement or vibration that could affect measurements.
Operational Guidelines
Installation:
Follow the manufacturer’s instructions for proper installation to ensure accurate measurements.
Ensure that the sensor is installed in a location that is representative of the liquid level being measured.
Avoid installing the sensor in areas with high electromagnetic interference (EMI) to prevent signal distortion.
Calibration:
Perform on-site calibration using the provided buttons to set the range, zero-point, and full-scale values.
Regularly recalibrate the sensor to maintain accuracy, especially if there are changes in the operating environment or measured medium.
Maintenance:
Regularly inspect the sensor for any signs of wear or damage.
Clean the probe periodically to remove any buildup that could affect measurement accuracy.
Replace any damaged components promptly to ensure reliable operation.
Monitoring and Troubleshooting:
Monitor the sensor’s output regularly to detect any anomalies or deviations from expected readings.
Refer to the user manual for troubleshooting common issues and contact technical support if necessary.
The RF Admittance Level Sensor from Shenzhen Soway Tech Limited is a reliable and versatile solution for level measurement in various industrial applications. By following the safety and operational guidelines provided, users can ensure accurate and consistent performance, minimizing downtime and maintenance requirements. For more detailed information and support, refer to the user manual or contact Shenzhen Soway Tech Limited’s technical support team.
